ESAB Fabricator EM 401i / 501i welding machine (semi-automatic)

€4,598.00

Add to cart

ESAB Fabricator's inverter-based technology increases energy efficiency, easier operation and better overall efficiency. It's a workstation designed for maximum mobility in your workplace, so the next difficult, heavy-duty welding job will be done with the click of a finger.

RELIABLE INDUSTRY!

Designed for heavy industrial MIG welding, continuous wires with welding capacity up to 500 A and 400 A with 60% duty cycle. The fabricator is designed for wire sizes from 0.8 mm to 1.6 mm and works with a variety of gases - it even provides high quality welds with pure CO2 shielding gas.

Impressive energy efficiency!

Higher energy savings with less energy Fabricator's high-efficiency inverter technology delivers 87% energy efficiency — saving up to $ 750 * per year.

* Two shifts, welding 350 A at 40% duty cycle compared to standard transformer technology.

EASY TO USE AND ADJUST!

Easy to use, containing only the settings and functions needed to make welding simple and straightforward. Operators can remotely change controls from the wire feeder, and welding spatter is minimal at low or high parameters.

STABILITY AND MOBILITY!

ESAB Fabricator welding machines are a fully mobile welding workstation that easily moves around your workplace, existing workpieces and is equipped with large, wide wheels, crane-safe handles, a low-profile cylinder tray and chain locking mechanism, as well as two cable holders.

OVERALL VALUE!

All the advantages of inverter technology, but with lower operating costs compared to conventional transformer welding equipment.

APPLICATION:

Civil construction

Industrial and general production

Repair and maintenance

Technical information:

ESAB Fabricator EM 401i

Mains voltage: 380 - 415 V, 3ph, ± 10%, 50/60 Hz

Working load, MIG / MAG: 400 A at 60%; 310 A at 100%

Workload, MMA: 400 A at 60%; 310 A at 100%

Setting range, MIG / MAG: 30 A / 15.5V - 400 A / 34 V

Setting range, MMA: 30 A / 21.2V - 400 A / 36 V

Wire dimensions: 0.8 - 1.2 mm

Efficiency at maximum current: 86%

Maximum power factor current: 0.91

Power save mode: <35 W

Operating temperature: -10 to +40 ° C

Dimensions: 1035 x 500 x 1015 mm

Safety class: IP23

Application class: S

Insulation class: H

Certification mark: CE, EAC

Cooling module: COOL 2F

Cooling capacity: 1 kW at 25 ° C at ambient temperature

Coolant volume: 4.5 l

Maximum water flow: 1.8 l / min

Wire feed speed: 1.5 - 25.0 m / min

Wire coil capacity: 18 kg

Maximum spool diameter: 300 mm

Wire feed mechanism size: 675 x 265 x 418 mm

The ESAB Fabricator EM 401i kit includes:

ESAB Fabricator EM 401i power supply with integrated coolant 0446400883

ESAB Fabricator Feed 304w wire feed mechanism prepared for liquid cooling burners 0446401882

Between the cable 70mm2 with water cooling 2m long 0459836890

Welding torch ESAB MXL 411W with water cooling and Euro connection, 4 m 0700025251

Mass terminals

ESAB Fabricator EM 501i

Mains voltage: 380 - 415 V, 3ph, ± 10%, 50/60 Hz

Working load, MIG / MAG: 500 A at 60%, 390 A at 100%

Workload, MMA: 500 A at 60%, 390 A at 100%

Setting range, MIG / MAG: 30 A / 15.5V - 500 A / 39 V

Setting range, MMA: 30 A / 21.2V - 500 A / 40 V

Wire dimensions: 1.0 - 1.6 mm

Efficiency at maximum current: 87%