Sherman DIGIMIG 225GDS inverter type welding machine (semi-automatic)

The welder allows long-term welding without the risk of overheating, the parameters 30% 220A are given for an ambient temperature of 40 degrees. In real conditions, this allows welding materials with a thickness of 5-6 mm in a continuous mode, i.e. 100% cycle.

SYNERGISTIC CONTROL

225 The GDS is a versatile tool that allows you to work in manual and synergistic mode. Synergy operates in multi-channel mode, automatically adjusting the parameters for different materials, i.e. black steel Fe, stainless S and aluminum with magnesium AlMg or Silicon AlSi depending on the wire diameter and gas used.

Additional advantages of welding equipment:

IGBT - a modern transistor used in the welder, which provides minimal electromagnetic interference, low power losses in the main circuits, allowing to increase the efficiency and reliability of the energy source.

2T / 4T - by pressing the start button the welding process takes place, after releasing the button the welding process is stopped - by pressing the button four times, the welding process is followed by the second press, it is a more convenient solution for longer welds.

REG. INDUCTIVITY - allows less heat to be injected at the welding site. The metal sheet does not deform and the protective layer of zinc is not damaged, useful for brazing welding.

Soldering - is a method that is very similar to MIG / MAG welding, but in this case the energy consumed is much less. This means that sheet welding is used to join thin sheets coated with a layer of zinc. The method described is a welding process in which the solder melts, not the material we work with. The second part of the name, MIG / MAG, comes from the use of the wire melting method in an electric arc surrounded by a shielding gas, as well as from the preparation of the edge of the material in the same way as for traditional welding. The brazing method is used not only for welding galvanized sheets, but also for thin sheets.

SETTINGS MEMORY - the device can store 10 channels with individual settings.

ARC FORCE "arc dynamics" - an increase in welding current is added to shorten the arc length, which stabilizes the arc regardless of its length. This is responsible for the depth of penetration and reduces chipping.

VRD (Voltage Reduction Device) - a function that, after welding, shuts off the current in milliseconds, thanks to which the voltage of the coated electrodes is equalized to a safe level.

ANTI STICK (MMA) - allows the welder to easily separate the electrode from the product without risking the eyes. In the event of a short circuit (if any), the welding current is automatically reduced after a short interruption. After removing the electrodes from the cell, the source automatically resumes its operation.

HOT START - ensures the highest welding start quality, first class ignition - when the welding current increases from the set working level to the optimal level in a short time due to the electric arc. In some cases (when working with a weak network or generator) this level can be set manually if a switch is suitable (as in the "Professional" series). Lowering the "hot start" to reduce energy consumption from a weak network or increase it from a strong network greatly simplifies ignition.

Option: SPOOL GUN - welding gun with built-in wire feeder. It is mainly used in car workshops and, when welding thin sheets, is ideal for hard-to-reach places and heights. The welding wire spool is located in the gun handle. The handle has a standard EURO connector and a control plug.

FORCE: 230 V 50 Hz

PULSE: No.

COIL GUN: Yes (optional)

brawl: Yes

KG SPOLS: 5

SYNERGY: Yes

FEEDER: 2 WHEELS

2T / 4T: Yes

MEMORY OF SETTINGS: Yes

WIRE DIAMETER [mm]: 0.6 / 0.8 / 1.0

WIRE FEED SPEED [m / min]: 2 - 14

NOMINAL Welding current [A]: 220

OPERATING CYCLE [%]: 30% 220A 60% 158A 100% - 113A

MIG MAG welding adjustment range [A]: 50 - 220

MULTIPLE CYCLE: thirty

TIG DC welding control regulation [A]: 15 - 210

TIG CYCLE: thirty

MMA welding adjustment range [A]: 40 - 210

MMA WORKING CYCLE: thirty

HOT START FUNCTION - MMA: 0-10

FUNCTION OF ARC FORCES - MMA: 0-10

WFD FUNCTION: Yes

MIG MAG welding voltage [V]: 17.5 - 24.7

Max. ENERGY CONSUMPTION [kVA]: 5.9

DEVICES Weight [kg]: 13

DIMENSIONS [mm]: 450 x 218 x 370

SECURITY LEVEL: IP21S

COOLING: fan (air)