Sherman DUALMIG 210 S3 welding machine (semi-automatic)

The welder is shown the parameters, even in the no-load condition. This is a very practical solution that allows you to set more precisely. It is one of the few welders in this price range to have this capability.

The semi-automatic DUALMIG 210 S3 is used for manual welding of steel and non-ferrous metals. It allows welding using MIG / MAG, MMA (coated electrode) and TIG Lift methods, it can also be used for brazing thin (up to 3 mm) galvanized sheets. Changing the polarity. The welder is used indoors or on a roof that is not exposed to direct weather conditions. DUALMIG 210 S3 works with wire spools D200 (5 kg) and D300 (15 kg). The device allows the connection of a coil (SG) type gun, which allows welding with two different wires without changing the welding machine. It has the ability to adjust the inductance used for brazing welding and the penetration control during welding. The device is equipped with a 2-roll wire feeder with even feed speed control and an AC 36V gas heater power socket.

FORCE: 230 V 50 Hz

PULSE: No.

KG SPOLS: 5/15

SYNERGY: No.

SURFACE FEEDER: 2 WHEELS

WIRE FEED SPEED [m / min]: 1.5-13

NOMINAL Welding current [A]: 200

OPERATING CYCLE [%]: 60

MIG MAG welding adjustment range [A]: 35-200

TIG DC welding adjustment regulation [A]: 30-180

MMA welding adjustment range [A]: 30-180

Voltage adjustment range [V]: 15-23

Max. ENERGY CONSUMPTION [kVA]: 8.5

NETWORK SECURITY [A]: 25

DIMENSIONS [mm]: 782 x 252 x 345

SECURITY LEVEL: IP21S

COOLING: fan