SPARTUS EasyMIG 375 LCD welding machine (semi-automatic)

SYNERGIC AND STRONG IGBT MIG WITH LCD DISPLAY

SPARTUS® EasyMIG 375 these high-end semi-automatic welding machine (compact type), made of inverter technology using IGBTs. It allows gas metal inert and active arc welding  MIG/MAG), metal arc welding (MMA) and TIG Lift with arc ignition. Thanks to the ability to change polarity, it allows welding with self-shielding wire without gas.

Max welding current is 350A for MIG/TIG, for MMA – 300A and is powered from three phase 400V source power.

The device is equipped with synergic programs for MIG / MAG welding with steel wires in the 0,8 - 1,2mm diameter range. Additionally, it is possible to manually correct selected parameters.

The use of modern technological solutions has allowed the device to be equipped with a number of functions that support welding processes:

2T / 4T – selection of one of two operating modes (MIG/MAG).

Inductance – regulation of welding inductance – it allows to control the width and depth of fusion and reduce the amount of welding splashes

Burn Back – precise adjustment of welding wire burning speed allows limit a risk of sticking the welding wire to the contact tip.

Slow Feed – so called gentle start-up of the wire feeder, recommended especially during welding with high amperage and high speed of wire feed.

Hot Start – for easier electrode ignition (MMA) Arc Force – for easier welding in forced positions (MMA)

VRD – lower no-load voltage (MMA).

A high-class 4-roll wire feeder, ensures stable wire feeding of steel, aluminum and stainless steel wire. Stable output parameters guarantee the appropriate quality of the weld.

Technical details

Input ~3× 400V ± 10% 50 / 60 Hz

MIG welding current 50 - 350A

MIG duty cycle 60%

Output working voltage 9.9 - 35V

Wire feeder built-in, 4-roll gear

Wire feeding speed 0.8 - 16m/min

Welding wire spool ≤ 15kg / ∅200/300mm

Wire diameter 0.8 / 1.0 / 1.2mm

Synergy yes

2T/4T Control yes

Additional MIG functions inductance control, wire test, change polarity

TIG Lift yes

TIG welding current 10 - 350A

MMA welding current 10 - 300A

Arc Force yes

Hot Start yes

VRD yes

Current consumpiton MIG 21 / MMA 19 / TIG 16A

Power factor (cosφ) 0.93

Efficiency η 80%

Insulation class H

Protection class IP21S

Weight 39kg

Dimensions 920 x 470 x740mm

Package equiped:

• Device SPARTUS® EasyMIG 375

• MIG gun SPARTUS® SPE 360 3m

• 2x wire guide roller 1.0-1.2V fi30

• electrode holder

• work clamp

• gas hose

• user’s manual