Welcome!
Industar e-shop
All prices include VAT *
SPARTUS EasyTIG 200P AC/DC invertora tipa argona metināšanas iekārta aparāts
SPARTUS® EasyTIG 200P AC/DC is digitally controlled inverter welding machine, constructed on the basis of IGBTs and PWM technology. Allows welding AC/DC TIG and AC/DC MMA. It is powered with single-phase 230V source power.
Machine enables two methods of arc ignition: TIG HF and TIG Lift. In addition, it has a built-in pulse welding function, which is useful to join very thin elements.
The easy-to-use function panel allows precise control of all the most important welding parameters. The modern display, using the TIG function waveform, facilitates the management of advanced parameters:
-pre-gas and post–gas,
- start amps, peak current and end amps,
- up slope and down slope,
- AC frequency (with mileage control),
- AC balans (20 – 80%),
- SPOT welding,
and during welding with pulsed current:
- pulse width ( 5-100%),
- base current (10-200A),
- pulse frequency (0.5 – 200Hz).
Depending on the welder’s preferences EasyTIG 200P AC/DC can work in 2T or 4T mode.
MMA welding mode (to 200A) is assisted by functions: Arc Force and Hot Start.
The machine has 6 channels on which you can set and save your own welding parameters in the device memory.
SPARTUS® EasyTIG 200P AC/DC is designed and manufactured in order to fieldwork. Despite its small dimensions and weight, it allows for advanced welding TIG method.
Examples of use: portable repair, workshop, maintenance, light constructions.
Technical details
Input ~1× 230V ± 10% 50 / 60 Hz
TIG welding current AC HF 10 - 200A / AC Lift 30 - 200A / DC 10 - 200A
TIG duty cycle 35%
Gas pre flow 0 - 1s
Gas post flow 0.1 - 10s
Up slope 0 - 5s
Down slope 0 - 5s
TIG Pulse yes
Pulse Amps 10 - 200A
Pulse Width 5 - 100%
Pulse frequency 0.5 - 200Hz
AC frequency 40 - 250
AC wave forms square, sinusoidal, triangular
AC balance 20 - 80%
2T/4T Control yes
SPOT welding yes
Arc ignition HF, without HF
MMA welding current 10 - 200A
Arc Force yes
Hot Start yes
No-load voltage 60V
Current consumpiton TIG 36 / MMA 43A
Power factor (cosφ) 0.73
Efficiency η 85
Insulation class H
Protection class IP21S
Weight 11kg
Dimensions 490 x 225 x 340mm
Package equipement:
• EasyTIG 200P AC/DC
• TIG torch SPE 17 1B 4m
• TIG toolbox (consumable kit)
• electrode holder
• work Clamp
• gas hose
• user’s manual
Cart
Cart is empty.