Sherman DIGITIG pulse AC/DC 200GD inverter type argon welding machine

Digital welding machine DIGITIG PULSE AC / DC 200GD is a device of the latest generation, intended for professional use.

It is made in IGBT technology and equipped with digital control. It is used for manual welding using TIG steel and non-ferrous metal as well as alternating current.

The device is equipped with the option of MMA welding (coated electrode).

It is used in a wide range both in production and service work. The welder allows full digital adjustment and control of welding parameters for arc and pulse characteristics. It has HF ignition, 2T / 4T function and a display indicating the welding current.

The device has the memory of the last setting, i.e. after it has been switched off and on again, the last parameters set and the possibility of storing 10 sets of pulse and welding current settings are restored.

The set includes a TIG welding torch, electrode wire and ground cable.

Functions:

• Digital control
• HF
• 2T / 4T
• Electrode cleaning function
• Pulse
• Rising current
• Falling down
• Gas outflow
• Gas pre-flow
• Frequency adjustment of welding current
• Welding with alternating current

Set contains:

• Welding machine DIGITIG pulse AC / DC 200GD Sherman
• Welding torch T-26 / 4m
• Electrode wire
• Mass line

• Supply voltage [V] AC 230V 50Hz
• Welding methods TIG AC / DC, MMA
• IGBT technology
• Welding current [A] TIG: 200 / MMA: 180
• Work cycle [%] 40
• Tension in a state without a stitch. [V] 59
• Max. current consumption [A] TIG: 36.5 / MMA: 26.8
• Max. power consumption [kVA] TIG: 4.2 / MMA: 6.6
• Gas pre-flow [s] 0.1-10
• Gas flow [s] 0-15
• Current increase [s] 0-10
• Dropping current [s] 0-25
• Initial current [A] 10-200
• Base current [A] 5-95% of welding current
• Crater current [A] 10-200
• Pulse frequency [Hz] 0.5-200
• Frequency AC [Hz] 40-200
• AC Balance [%] 30-70
• Duration of pulse [%] 10-90
• Welding current regulation - smooth
• Weight [kg] 18.5
• Dimensions (D x W x W) [mm] 455 x 195 x 415